Transport Leg Brace

IMPORTANT PRODUCT INFORMATION—PLEASE READ BEFORE USING

INTENDED USE: To allow a restrained person to stand trial or fly while jurors or other passengers are unaware of the presence of any restraints. Although this leg brace will impede the progress of the person wearing it, at no time should the restrained person be unattended or unobserved by law enforcement personnel. Use only as specified in the instructions.

INSTRUCTIONS: First, make sure you are correctly using a right or left leg restraint. To verify, check the stamp inside the metal bar by lock. L is for left, R is for right.

After you have verified the correct side to apply the restraint, unlock the lock and pull apart all hook and loop straps. Then hold the restraint against the leg with the hinge at the knee, close the hook and loop straps around the leg, and lock the leather strap at the ankle (using the locking instructions on the lock and key spec sheet).

NOTE: Do not use for prolonged periods of time. Improper adjustment may prohibit proper circulation.

INVENTORY ID: LAB-100-R (right), LAB-100-L (left)
WEIGHT: appx. 2.5 lb.

DESCRIPTION:

The metal piece on the leg brace is 27" long. The 2" wide nylon straps from top to bottom are 37½", 32½", and 30½" in length. The leather strap at the bottom is 17" long and 1¼" wide with 10 size adjustments.

SAFETY CHECK

Including, but not limited to, lock, hook and loop, hinge, nylon edges, stitching, rivets, and metal tips.

MATERIALS USED

Black dyed 11+ oz leather, 2" metal tips, 2" black nylon, 1½" hook and loop, L-300 lock, and stainless steel upright with loop lever

CLEANING AND MAINTAINING

For regular cleaning, wipe with a mild soap and warm water. When decontaminating bloodborne pathogens, use one cup of bleach to a gallon of water, then rinse. After wiping the leather, allow it to air dry and apply neat's-foot oil. Be sure to oil the hinge and lever weekly to assure properly working parts.

STORAGE

Store in a dry area to prevent mildew.