RAIL SAFETY BELT

IMPORTANT PRODUCT INFORMATION—PLEASE READ BEFORE USING

INTENDED USE: Rail safety belts may be used in many ways, such as controlling movement of a person in a bed, wheelchair, or stretcher.

INSTRUCTIONS: Lay both pieces of webbing flat. Take the webbing piece with the buckle on one end and lay it on the bed, positioning the buckle in the middle of the bed. Loop the other end around the bar you wish to attach it to by first feeding under the bar and then over the top to reach the black slide.

Feed through the closest side of the slide bar over the top of the first layer. Pull tight to the bar and hold, then feed through the other side of the slide to secure. Then take the other webbing piece and place it on the other side of the bed positioning the end with the end tab in the middle to feed through the buckle. Use the same procedure as previously listed to secure the strap to the proper bar.

Pull up on the tongue of the buckle and feed the angled end through the opening. Pull on the strap fed through to tighten, then push down on the tongue to secure. Be sure to push the tongue all the way down into the closed position or the webbing may slip through the opening. NOTE: Do not use for prolonged periods of time.

COLORS AVAILABLE:

Red, Orange, Yellow, Green, Blue, Gray, Black.

SAFETY CHECK

Including, but not limited to, webbing edges, and safety buckle.

MATERIALS USED

2" webbing, 2" acetal slide bars, and quick-action safety belt buckle.

CLEANING AND MAINTAINING

: Dry clean or launder at less than 280°F. When decontaminating bloodborne pathogens, use bleach while laundering.

STORAGE

Store away from heat greater than 280°F or open flame.

Caution: Federal law restricts this device to sale by or on the order of a physician.