POLYPROPYLENE TORSO RESTRAINT

IMPORTANT PRODUCT INFORMATION—PLEASE READ BEFORE USING

INTENDED USE:To restrain a person while in bed. May be used with or without wrist and ankle restraints.

INSTRUCTIONS:To use the polypropylene torso restraint, lay the restraint over the portion of the body which is to be restrained. If you are using as a chest restraint, lay the restraint over the chest but under the arms. If used as a sixth point, it should be placed above or below the knees. Loop the tail of the side strap under and around the bed frame, and snap the buckle closed or lock with instructions on back of this page, or seal hook and loop by pressing.

Note: Do not use for prolonged periods of time. Improper adjustment may prohibit proper circulation.

INVENTORY ID:

DESCRIPTION:

Polypropylene torso restraint is 96" long and 2" wide. The 2" side release buckle, L-400 lock or 2" hook and loop material is sewn 28" from each end. Custom sizing is available upon request.

SAFETY CHECK

: Including, but not limited to, polypropylene, stitching, and side release buckles, L-400 lock buckles or hook and loop

MATERIALS USED

2" black nylon, 2" side release buckles or L-400 lock buckle or hook and loop, and 2" slide bar

CLEANING AND MAINTAINING

Dry clean or launder at less than 280°F. When decontaminating bloodborne pathogens, use bleach while laundering.

STORAGE

Store away from heat greater than 400°F or open flame. Hook and loop should be stored in a closed position.

Caution:

Federal law restricts this device to sale by or on the order of a physician.