Nylon Ankle Hobble

IMPORTANT PRODUCT INFORMATION—PLEASE READ BEFORE USING

INTENDED USE: To allow a restrained person to walk but impedes them from running or kicking. Use only as specified in the instructions.

INSTRUCTIONS: Before applying the restraint, open completely. Wrap the first cuff around the ankle so the D-rings are to the front and the hook end is around the back. Adjust to the proper fitting and secure the hook to the loop. Feed the 1" strap through the D-rings, then split the D-rings and go back through the second D-ring. Pull on the end of the strap to secure. Use the same procedure for the other ankle.

NOTE: Do not use for prolonged periods of time. Improper adjustment may prohibit proper circulation.

INVENTORY ID: NAH-200

WEIGHT: Approx. 7 oz

DESCRIPTION:

Ankle cuffs are 15" long and 2” wide. Cuffs are secure first with hook and loop, then a secondary closure of 1" double-D-rings. The anklets are permanently attached to each other by a 9" long by 1" wide nylon strap which is sewn.

SAFETY CHECK

Including, but not limited to, stitching, nylon, and hardware.

MATERIALS USED

1" and 2" black nylon, 1½" hook and sheet loop, 1" steel D-rings or 1" side release buckle, 1" tuck loop, neoprene.

CLEANING AND MAINTAINING

Dry clean or launder at less than 280°F. When decontaminating bloodborne pathogens, use bleach while laundering.

STORAGE

Store away from heat greater than 280°F or open flame.