Vinyl Limb Holders
INTENDED USE: To restrict motion of the limbs of the restrained person. Use only as specified in the instructions.
INSTRUCTIONS: Open restraint completely and lay flat. Put the limb which is to be restrained on the flattened restraint and fold the sides over so the hook and loop are attached.
Then feed the strap of the secondary closure through the buckle or lock (use locking instructions on back of this page) and fasten securely. Continue by wrapping the long strap around a bed frame and feeding through the buckle or lock (using locking instructions on back of this page) and fasten securely
Note: Do not use for prolonged periods of time. Improper adjustment may prohibit proper circulation.
| INVENTORY ID | Approx.Weight | |
|---|---|---|
| L-400 lock | LHL-800 | 10 oz |
| Web buckle | LH-802 | 8 oz |
DESCRIPTION:
Both cuffs are 12½" long and 2" wide with 4" of hook and loop and fleece lining; secondary closure strap is 19" long and 2" wide; and strap to secure to bed or rail is 46" long and 2" wide. The vinyl is perforated to promote proper air circulation.
SAFETY CHECK
Including, but not limited to stitching, secondary closures, hook and loop, and vinyl.
MATERIALS USED
L-400 lock or web buckle, 2" nylon, 1½" hook and loop, and perforated vinyl with fleece lining.
CLEANING AND MAINTAINING
Dry clean or launder at less than 280°F. When decontaminating bloodborne pathogens, use bleach while laundering.
STORAGE
Store away from heat greater than 280°F or open flame.
Caution:
Federal law restricts this device to sale by or on the order of a physician.