LEATHER NON-LOCKING BED RESTRAINTS

SKU:
Regular price
Regular price Sale price $0.00

Why Choose SecurityPro USA?

IMPORTANT PRODUCT INFORMATION—PLEASE READ BEFORE USING

INTENDED USE: To restrict motion of the limbs of the restrained person. Use only as specified in the instructions.

INSTRUCTIONS:Check whether you have a wrist or ankle bed restraint. W stands for wrist, A for ankle. Another way to differentiate is that the wrist cuffs are 26" apart on the bed restraint and the ankle cuffs are 14" apart.

Lay the restraint flat on the bed with the straps hanging off the side. Loop the straps around the anchoring point and pull through the roller buckle and keeper. Use the same procedure for the strap on the other side.

Then open the restraint by pulling out the leather strap on the wrist or ankle cuff so it is no longer through the loop. Pull up on the end to release from the loop and lay flat. Put the wrist or ankle on the flattened restraint, wrap the cuff around the limb, and adjust to the proper size. Feed the end of the attached strap through the loop to secure.

Note: Do not use for prolonged periods of time. Improper adjustment may prohibit proper circulation.

INVENTORY ID Approx.Weight
Wrist CBW-201 2 lb 2 oz
Ankle CBA-201 2 lb 3 oz

DESCRIPTION:

The center webbing is 38" long and 4" wide. The leather straps are 32" long and 1¼" wide with twelve size adjustments. Wrist cuffs are 12" long and 3" wide with four size adjustments ranging from 8" – 10" and ankle cuffs are 14" long and 3" wide with four size adjustments ranging from 9½" – 12". Custom sizing available upon request.

SAFETY CHECK

: Including but not limited to, stitching, loops, rivets, roller buckles, and leather.

MATERIALS USED

12/13 oz leather, light orthopedic leather lining, 3-ply cotton webbing, steel loops, and 1¼" steel roller buckles.

CLEANING AND MAINTAINING

: For regular cleaning, wipe the leather with a mild soap and warm water. The webbing can be scrubbed with a soft brush and the same solution. When decontaminating bloodborne pathogens, use one cup of bleach to a gallon of water, then rinse. After wiping the leather, allow it to air dry and apply neat's-foot oil.

STORAGE

Store in a dry area to prevent mildew

Caution:

Federal law restricts this device to sale by or on the order of a physician.