Leather Bed Torso Restraint

IMPORTANT PRODUCT INFORMATION—PLEASE READ BEFORE USING

INTENDED USE: To restrain a person while in a bed. It may be used with or without wrist and ankle restraints.

INSTRUCTIONS: To use the CBR-101, lay the restraint over the portion of the body which is to be restrained. If you are using as a chest restraint, lay the restraint over the chest but under the arms. If you are using as a sixth point restraint, lay the restraint above or below the knees. Loop the tail of each leather strap under and around a bar or rail. Feed the tail through the roller buckle, positioning the tongue of the roller buckle in the appropriate size adjustment for both sides.

To use the CBL-101, position the restraint as in CBR-101. Loop the tail of each leather strap under and around a bar or rail. Feed the tail into the lock. Continue by using locking instructions on Locks and Keys spec sheet.

NOTE: Do not use for prolonged periods of time.

DESCRIPTION:

Center webbing is 48" long and 4" wide. Each side strap is 20" long and 1¼" wide. The leather straps have ten size adjustments. Custom sizing available upon request

SAFETY CHECK

Including, but not limited to, stitching, rivets, leather, webbing, and locks or buckles

MATERIALS USED

Two-ply cotton webbing; welded steel keepers; 12/13 oz leather; 1¼" wide roller buckles or Humane Restraint L-300 lock buckles.

CLEANING AND MAINTAINING

For regular cleaning, wipe the leather with a mild soap and warm water. The webbing can be scrubbed with a soft brush and the same solution. When decontaminating bloodborne pathogens, use one cup of bleach to a gallon of water, then rinse. After wiping the leather, allow it to air dry and apply neat's-foot oil.

STORAGE

Store in a dry area to prevent mildew.

Caution: Federal law restricts this device to sale by or on the order of a physician.